HESCO M210 Plates Package (IN STOCK – FREE SHIPPING!)

Sale!
200-series_sans-full200-series_sans-full

HESCO M210 Plates Package (IN STOCK – FREE SHIPPING!)

$465.00$599.00

This category will NOT ALLOW backorders and will only allow you to order if we have your specific model and size in stock. If you are looking to order a plate that we do not have in stock and are ok waiting 8-10 weeks, look HERE.

Package of 2 plates, both the same size (selected below). Advanced Spectra® design. Full AK-47 protection including 7.62 x 39 API. Multi shot rated on selected threats. Water repellant polyurethane coated CORDURA® fabric finish. Made in the U.S.A.

REQUIRED ACKNOWLEDGEMENTS

No armor can be sold internationally. No armor can be sold to CT. Felons are not generally eligible to own armor. Check your local laws before ordering if you have any questions.

All armor sales are final and cannot be canceled once in the "processing" status. Body armor is not returnable for any reason. Please ensure proper sizing and measurements before placing your order.

Armor Package Shipping Lead Time

I understand that this promotional priced armor package will be shipped via FedEx between April 21-28

Order total:
SKU: N/A

HESCO 200 SERIES PLATES ARE DESIGNED TO BE WORN WHERE CONCEALABILITY IS AN ASSET, FEATURING MODELS THAT OFFER BOTH LOW VISIBILITY AND SPECIAL THREAT PROTECTION.

Single and multi-curve designs in shooter, full and SAPI cuts are available depending on model.

  • COST EFFECTIVE WITH NO COMPROMISE ON QUALITY
  • ADVANCED COMPOSITE MATERIALS
  • SINGLE AND MULTI-CURVE DESIGNS
  • HIGHLY DURABLE, WATER RESISTANT POLYURETHANE COATED CORDURA® FABRIC FINISH
  • PRECISION QUALITY CONTROL

BI M210 – PACKAGE of 2 plates 

 

SWIMMER CUT – MULTI CURVE – TORSO PLATES

Part Number Nominal Width x Length Thickness Weight
M210-SW-MC-L 10.0 X 12.0 inches / 254 x 305 mm 0.62 inches / 15.75 mm 5.1 lb / 2.3 kg
M210-SW-MC-S 9.1 X 11.10 inches / 231 x 282 mm 0.62 inches / 15.75 mm 4.4 lb / 2.0 kg

SAPI CUT – MULTI CURVE – TORSO PLATES

Part Number Nominal Width x Length Thickness Weight
M210-SA-MC-XL 11.00 x 14.00 inches / 279 x 356 mm 0.61 inches / 15 mm 6.7 lb / 3.0 kg
M210-SA-MC-L 10.25 x 13.25 inches / 260 x 337 mm 0.61 inches / 15 mm 5.8 lb / 2.6 kg
M210-SA-MC-M 9.50 x 12.50 inches / 241 x 318 mm 0.61 inches / 15 mm 5.0 lb / 2.3 kg
M210-SA-MC-S 8.75 x 11.75 inches / 222 x 293 mm 0.61 inches / 15 mm 4.3 lb / 2.0 kg

Manufacturing Tolerances:

  • Thickness dimensions are ± 1/8 in (± 3 mm).
  • Width and length dimensions are +0.00 to -0.25 in (+0.00 to -6 mm). All weights are ± 5%.

Is body armor legal for civilians?

We are not attorneys, or experts on the law (you should consult one if you have questions), but YES! Body armor is legal for almost anyone in the USA to own! Body Armor is regulated by Federal Law. No armor can be sold internationally.

At the time of writing, body armor is legal in all 50 states with the following three restrictions:

  • Body Armor is illegal to possess if you have been convicted of a violent felony.
  • Body armor may not be shipped to any civilians in Connecticut (CT). It is legal to purchase, possess and own body armor in CT, but it cannot be shipped.
  • Wearing body armor while committing a crime can increase penalties greatly.

Check your local laws before ordering if you have any questions.

What NIJ or protection level is best for me?

In addition to possible department regulations, some factors to consider regarding NIJ Level include:

  • Select armor designed to defeat ammunition used in your own firearm or in weapons known to be used in the area you patrol
  • Know if your armor will be used as part of an Active Shooter Kit or worn for extended periods (consider how the weight of the plates might affect you)
  • Know what firearms are used by your workforce (friendly fire?)
  • Be aware of sport shooting or hunting in your area

If you are interested in reading more, you can visit the NIJ website and read more about the NIJ Body Armor Performance Standards.

It is also important to note that if you do not require NIJ certification, there are several "Special Threat" options that may provide some benefit for your intended use. For an overview of the various protection levels offered by HESCO plates, consult the "Threat Matrix".

HESCO Testing Protocol

NIJ Certification of hard armor requires submission of 10” x 12” test plates which must demonstrate the ability to defeat specific rounds tested to a valid NIJ shot pattern, after exposure to a stringent conditioning protocol to simulate aging and wear. Level III requires six M80 rounds per plate. Level IV requires one AP M2 per plate. NIJ’s process provides for the inclusion of other size torso plates of identical construction to be included under the Certification without further NIJ testing. Hesco holds itself to a higher standard by publishing the minimum number of shots that each size plate can be expected to defeat under similar NIJ testing methods, as well as listing many additional threats not addressed under the NIJ Certification process. The minimum number of shots are shown in the Threat Performance Matrix.

Why use ceramic plates over steel plates?

Ceramic (aka composite) body armor plates are lighter than steel plates, which can increase comfort and maneuverability, especially when wearing the armor for longer periods of time. Ceramic body armor technology advancements continue to offer better threat protection, which can meet and often exceed the threat protection offered by steel plates.

What size plate should I get?

Selecting the proper body armor size, to allow maximum protection and maintain ease of mobility, is of utmost importance. The NIJ (National Institute of Justice) has taken steps to address issues that affect law enforcement personnel’s use of body armor, including issuing guidance that advises agencies to consider comfort when selecting body armor as well as information on design elements that can affect comfort. NIJ’s body armor guidance also provides information on proper fit and advises agencies to inspect armor for proper fit. In addition, the guidance advises agencies to select armor that provides full front, back and side protection and includes information about the balance between comfort and protection. For more information, visit the article on the NIJ websites: “Factors that Affect Officers’ Use of Body Armor.” The primary organ to be protected is the heart. Since the heart is located with its apex near the left center chest, for optimum protection the chosen ballistic insert should be wide enough to ensure complete coverage of this area as shown in the illustration below. Typically, vital organs can be covered if you measure nipple to nipple and clavicle notch to belly button. A properly fitted torso plate should not interfere with the comfortable movement of the arms and shoulders. If a plate is too large it may impede mobility and result in difficulty holding, aiming or discharging a weapon which can result in fatigue and inaccuracy.

CHEST MEASUREMENT

Measure under arms around fullest part of the chest. Be sure to keep measuring tape level across back and comfortably loose.

LENGTH OF PLATE

Determine the length of the plate that best suits your body type while protecting all vital organs and vessels. Plate should fit comfortably when standing or sitting.

BE SURE PLATES FIT YOUR CARRIER

If you already have a vest or plate carrier, or if you will be purchasing one later, make sure it accommodates your new ballistic inserts.

STEP 1 – determine your chest measurement and length of plate that best suits you

STEP 2 – select your plate style and appropriate size

SAPI Cuts XS S M L XL
Shooter Cuts S L
Chest 32 - 35”
(81.3 - 88.9 cm)
36 - 39”
(91.4 - 99.1 cm)
40 - 43”
(101.6 - 109.2 cm)
44 - 47”
(111.8 - 119.4 cm)
48”+
(121.9 cm+)
Length of Plate Determine the optimum plate length for you.
When standing, the top plate edge should rest at the level of the suprasternal/jugular notch (see figure above).
Bottom plate edge should extend to approximately 4.5 inches above service belt
ensuring protection of vital organs and vessels.

How should my plates be positioned when worn?

MOBILITY AND COMFORT

Once the proper plate size has been determined, it is critical that plates be worn in the correct position on the body so as to allow maximum protection with minimal discomfort. When in a standing position, the top edge of the plate should rest at the level of the suprasternal / jugular notch (the soft spot right above the sternum). When your finger presses in that spot, the top edge of the plate should touch the bottom of your fingertip. Where the bottom plate edge rests depends on the wearer’s physical height. To insure protection of vital organs and vessels, the bottom edge of the front plate should extend to the bottom of the rib cage, or approximately 4.5 inches (114 mm) from the top of the service belt when standing. For comfort when seated, the space between the bottom plate edge and the service belt closes naturally preventing the insert from riding up into the neck area. A properly fitted torso plate should not interfere with the comfortable movement of the arms and shoulders. If a plate is too large it may impede mobility and result in difficulty holding, aiming or discharging a weapon which can result in fatigue and inaccuracy.

POSITIONING THE BACK PLATE

When positioned properly in a plate carrier, the top and bottom edges of the back plate should align with the top and bottom edges of the front plate when viewed from the side. This coverage area provides maximum protection from the rear as well as user comfort while seated or standing. For additional back protection, some users prefer a full cut plate for the rear facing pocket which provides more upper left and right corner area coverage.

What is the difference between single curve and multi curve body armor plates?

Improved comfort and fit is a distinguishing factor between single and multi-curve designs. The more comfortable the armor is to wear, the more likely it is to be worn. Multi-curve models are designed to fit more ergonomically and anatomically when positioned against the human torso. This translates into an improved range of motion and longer wearability in the field. Hesco offers both single and multi-curve models to accommodate most any budget.

Which plate shape and curvature is right for me?

Generally, plate shape is a matter of personal preference. For some using plates in a professional capacity, it may be a choice made at department/unit levels.
  • Shooter Cuts with more severe shoulder angles offer an increased range of motion over the older, now discontinued "full cut".
  • SAPI Cuts with slightly less severe angles are a military cut now available for law enforcement and other use.
  • Some users prefer SAPI Cut (and maybe even up one size) with slightly more coverage for use as a backplate. Often a larger plate on the back will not interfere with presenting your weapons, or limit your mobility like it might if worn on the front (plus it can counterbalance all the extra gear weighing down the front of the plate carrier...)

Why are the plates sold individually?

The body armor plates are priced and sold individually to allow maximum flexibility and configurability in purchasing options. Many users prefer different configurations, and selling the plates individually allows everyone to build their body armor system to their own specifications.

For example - some users may prefer a "shooters" cut for the front plate, but a SAPI cut for the rear. The rationale behind this option is that is allows slightly better coverage on the rear, with minimal impact to mobility and flexibility.

Reviews

There are no reviews yet.

Be the first to review “HESCO M210 Plates Package (IN STOCK – FREE SHIPPING!)”

Your email address will not be published. Required fields are marked *