![](https://i0.wp.com/pewpewsolutions.com/wp-content/uploads/2020/09/Armoers_Class_2__93609.1581962440.jpg?resize=1130%2C650&ssl=1)
This is an equipment list for our upcoming 2 DAY COMPREHENSIVE AR15 ARMORER’S COURSE W/ SONS OF LIBERTY GUN WORKS on Feb 20-21, 2020.
In addition to a complete AR15 rifle or carbine you will need the following:
Minimalist Tool List
- Glock Disassembly Tool
- 1″ Nylon/Brass Gunsmithing Hammer – Part# 818-600-100WB
- 6″ flat tip screwdriver or correct allen wrench/hex bit for pistol grip screw
- Pivot Pin Installation Tool – Part# 080-216-011WB
- 1/16 Flat Punch (Starrett is recommended)
- Notepad/Paper
- USB Flash Drive
BELOW LISTED TOOLS ARE IN ADDITION TO THE ABOVE TOOLS AND ARE ONLY FOR THOSE WHO ARE BUILDING A RIFLE DURING THE ARMORER COURSE. (With prior approval from instructor).
- Complete set of flat steel punches (Starrett Pin Punch set recommended) 1/16, 5/64, 3/32, 1/8, 5/32
- Complete set of roll pin holders (starter punches)
- Complete set of roll pin punches
- Small to medium pair of needle nose pliers
- Large flat tip screwdriver or variable tip screwdriver set
- Bolt Catch Pin Punch
- Pivot Pin Installation Tool – Part# 080-216-011WB
![](https://i0.wp.com/pewpewsolutions.com/wp-content/uploads/2020/09/89389821_1575071375950258_1080184854764584960_o.jpg?resize=1024%2C576&ssl=1)
Share This Post