Scalarworks LEAP/08 30mm Rings
$439.00 – $1,999.00
State of the art 30mm scope mounts.
Designed for shooters who want the lightest, stiffest, and easiest to use quick-detach scope mount possible.
LevelDrive™
An integrated set-screw lets you square your scope with your mount in record time.
Side KICK
Supercharge your sighting system by adding a reflex sight in the optimal offset position.
LIGHT MADE RIGHT
Engineered to be the lightest QD scope mount, without compromising an ounce of strength.
SCALARWORKS® SW0810 (154GRAMS)
SMART STRUCTURE
The Scalarworks LEAP/08 base incorporates different structural elements to maximize overall performance.
A large diameter tubular section up front to resist torsion from side impacts, and a very wide I-beam bridge in the rear to resist recoil induced oscillations.
Every Scalarworks Leap mount is CNC milled from 7075-T6 Aluminum billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
ViseRing™
Designed from the ground up to be lighter, lower-profile, and easier to use than traditional split rings.
A low-profile design doesn’t get in your way of viewing or manipulating your scope’s adjustment turrets.
A high-strength, multi-link hinge eliminates the uncertain and tedious setup required by split rings.
SMOOTH IS FAST
LEAP mounts have no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
ClickDrive™
The world’s most efficient quick-detach mechanism.
A fluted crown requires only the torque from your bare hand to securely clamp the mount onto a rail, and uses the force from a spring-loaded ball-detent to make it completely recoil proof. Return-to-zero is guaranteed as long as the same person takes it on and off.
30mm Ring Mount (1.57″ HEIGHT)
- Materials 7075-T6 Aluminum / 4140H Steel
- Finishes Type III Anodizing / Flash Nitride
- Center height over rail 1.57″
- Ring diameter 30mm
- Cant 0MOA
- Overhang 2.0″
- Weight 154g
- Origin United States of America
30mm Ring Mount (1.93″ HEIGHT)
- Materials 7075-T6 Aluminum / 4140H Steel
- Finishes Type III Anodizing / Flash Nitride
- Center height over rail 1.93″
- Ring diameter 30mm
- Cant 0MOA
- Overhang 2.0″
- Weight 163g
- Origin United States of America
Nightforce NX8 1-8 Bundle (1.57″ HEIGHT)
- Reticle FC-Mil Reticle / First focal plane
- Optical 1-8X24 / 106ft-13.2ft fov / 7.9-3.0mm exit pupil / 3.75″ eye relief
- Adjustments 0.2Mil-Rad / 30Mil-Rad (windage/elevation)
- Length 8.75″
- Center height over rail 1.57″
- Weight 640g
Nightforce NX8 1-8 Bundle (1.93″ HEIGHT)
- Reticle FC-Mil Reticle / First focal plane
- Optical 1-8X24 / 106ft-13.2ft fov / 7.9-3.0mm exit pupil / 3.75″ eye relief
- Adjustments 0.2Mil-Rad / 30Mil-Rad (windage/elevation)
- Length 8.75″
- Center height over rail 1.93″
- Weight 649g
Vortex Razor HD Gen2-E 1-6 (1.57″ HEIGHT)
- Reticle JM-1 BDC Reticle / Second focal plane
- Optical 1-6X24 / 115.2-20.5ft fov / 4.00″ eye relief
- Adjustments 0.5MOA/Click – 150MOA (windage/elevation)
- Length 10.1″
- Center height over rail 1.57″
- Weight 768g
Vortex Razor HD Gen2-E 1-6 (1.93″ HEIGHT)
- Reticle JM-1 BDC Reticle / Second focal plane
- Optical 1-6X24 / 115.2-20.5ft fov / 4.00″ eye relief
- Adjustments 0.5MOA/Click – 150MOA (windage/elevation)
- Length 10.1″
- Center height over rail 1.93″
- Weight 776g
30mm Ring Mount (1.57″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
- 30mm See technical drawing for details
30mm Ring Mount (1.93″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
- 30mm See technical drawing for details
Nightforce NX8 1-8 Bundle (1.57″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
Nightforce NX8 1-8 Bundle (1.93″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
Vortex Razor HD Gen2-E 1-6 (1.57″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
Vortex Razor HD Gen2-E 1-6 (1.93″ HEIGHT)
- Rails MIL-STD-1913 Picatinny*
30mm Ring Mount (1.57″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0810)
- Leveling system LevelDrive™ screw
- Fasteners M4x0.75 Nylok® treated (Torqued @ 20in*lbs)
- Drivers T25 Torx driver bit
- Manuals Scalarworks® Leap/08
30mm Ring Mount (1.93″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0820)
- Leveling system LevelDrive™ screw
- Fasteners M4x0.75 Nylok® treated (Torqued @ 20in*lbs)
- Drivers T25 Torx driver bit
- Manuals Scalarworks® Leap/08
Nightforce NX8 1-8 Bundle (1.57″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0810) – Leveled/attached to scope
- Optic Nightforce NX8 1-8×24 F1 (C598)
- Accessories Power Throw Lever / Rubber lens caps (installed)
- Battery CR2032 lithium (installed)
- Leveling system LevelDrive™ screw
- Fasteners #10-32×0.61″ Nylok® treated (Torqued @ 25in*lbs)
- Drivers T25 Torx driver bit
- Extras Nightforce Wrench / Lens Cloth
- Manuals Scalarworks® Leap/08 & Nightfroce NX8
Nightforce NX8 1-8 Bundle (1.93″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0820) – Leveled/attached to scope
- Optic Nightforce NX8 1-8×24 F1 (C598)
- Accessories Power Throw Lever / Rubber lens caps (installed)
- Battery CR2032 lithium (installed)
- Leveling system LevelDrive™ screw
- Fasteners #10-32×0.61″ Nylok® treated (Torqued @ 25in*lbs)
- Drivers T25 Torx driver bit
- Extras Nightforce Wrench / Lens Cloth
- Manuals Scalarworks® Leap/08 & Nightfroce NX8
Vortex Razor HD Gen2-E 1-6 (1.57″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0810) – Leveled/attached to scope
- Optic Vortex RAZOR® HD GEN II-E 1-6×24 (RZR-16008)
- Battery CR2032 lithium (installed)
- Leveling systemLevelDrive™ screw
- Fasteners #10-32×0.61″ Nylok® treated
- Drivers T25 Torx driver bit
- Extras Vortex Stickers / Wrench / Lens Cloth
- Manuals Scalarworks® Leap/08 & Vortex Razor
Vortex Razor HD Gen2-E 1-6 (1.93″ HEIGHT)
- Mount Scalarworks® Leap™ (SW0820) – Leveled/attached to scope
- Optic Vortex RAZOR® HD GEN II-E 1-6×24 (RZR-16008)
- Battery CR2032 lithium (installed)
- Leveling system LevelDrive™ screw
- Fasteners #10-32×0.61″ Nylok® treated
- Drivers T25 Torx driver bit
- Extras Vortex Stickers / Wrench / Lens Cloth
- Manuals Scalarworks® Leap/08 & Vortex Razor
Reviews
There are no reviews yet.